Brand: SeaCraft
Unit measure: pcs
ENC3M is a simple and reliable underwater navigation system- allowing for multi-point track planning,and GPS assisted re-calibration of diver position.
Care and Storage Instructions
- After use, wash in fresh water and allow to dry in a well ventilated area out of direct sunlight
- Store in a well ventilated dry area away from direct sunlight
NAVIGATION- Depth of start and stop of immersion time counting Optional: 0.5, 1 or 1.6 m
- Accuracy of depth measurement 0.3 m in the whole depth range, temp. range: 0…30°C
- Accuracy of ext. log <2%*
- Accuracy of compass <5 degrees*
- Possibility of using above the water level up to 5000 m
- Internal storage capacity 50 routes
- Included sensors 3D magnetometer, 3D gyroscope, 3D accelerometer, pressure sensor, temperature sensor
- Satelite positioning GPS, Beidou, GLONASS
- Data exchange via Bluetooth 4.2 and/or via USB cable
BATTERY- Battery type Built-in Li-ion 3,7 V**
- Battery capacity 5 Wh
- Average time of charging 100% <2 h
DIMENSIONS & WEIGHT- Width 30,6 mm
- Length 95 mm
- Height 71 mm
- Weight 290 g
*The accuracy of the measurement depends on the quality of the calibration and the absence of external interference.
**Device can use any 5VDC power source as charger. When charging, it can consume up to 1Acurrent.
Our products are manufactured using highest industrial and military standards, what is proven by following certifications:
- AQAP 2110 : NATO requirements for Quality Assurance in design, development and manufacturing
- ISO 9001 : Quality management system
- ISO 14001 :Environmental management system
Our NCAGE code is 99QRH
All of Seacraft batteries are UN38.3 certified.
Our products are compliant with:- Machinery Directive 2006/42/EC
- Low voltage Directive EMC 2014/30/UE
- PN-EN ISO 12100
- PN-EN ISO 13857
- PN-EN 349+A1
- PN-EN 1037+A1
- PN-EN 60204-1
